Linux cli command hackrf_sweep

➡ A Linux man page (short for manual page) is a form of software documentation found on Linux and Unix-like operating systems. This man-page explains the command hackrf_sweep and provides detailed information about the command hackrf_sweep, system calls, library functions, and other aspects of the system, including usage, options, and examples of _. You can access this man page by typing man followed by the hackrf_sweep.

  2 minute read  

NAME 🖥️ hackrf_sweep 🖥️

control frequency sweep of hackrf

DESCRIPTION

hackrf_sweep Usage:

[-h] # this help [-d serial_number] # Serial number of desired HackRF [-a amp_enable] # RX RF amplifier 1=Enable, 0=Disable [-f freq_min:freq_max] # minimum and maximum frequencies in MHz [-p antenna_enable] # Antenna port power, 1=Enable, 0=Disable [-l gain_db] # RX LNA (IF) gain, 0-40dB, 8dB steps [-g gain_db] # RX VGA (baseband) gain, 0-62dB, 2dB steps [-n num_samples] # Number of samples per frequency, 8192-4294967296 [-w bin_width] # FFT bin width (frequency resolution) in Hz [-1] # one shot mode [-N num_sweeps] # Number of sweeps to perform [-B] # binary output [-I] # binary inverse FFT output -r filename # output file

Output fields:

date, time, hz_low, hz_high, hz_bin_width, num_samples, dB, dB, . . .

Usage:

[-h] # this help [-d serial_number] # Serial number of desired HackRF [-a amp_enable] # RX RF amplifier 1=Enable, 0=Disable [-f freq_min:freq_max] # minimum and maximum frequencies in MHz [-p antenna_enable] # Antenna port power, 1=Enable, 0=Disable [-l gain_db] # RX LNA (IF) gain, 0-40dB, 8dB steps [-g gain_db] # RX VGA (baseband) gain, 0-62dB, 2dB steps [-n num_samples] # Number of samples per frequency, 8192-4294967296 [-w bin_width] # FFT bin width (frequency resolution) in Hz [-1] # one shot mode [-N num_sweeps] # Number of sweeps to perform [-B] # binary output [-I] # binary inverse FFT output -r filename # output file

Output fields:

date, time, hz_low, hz_high, hz_bin_width, num_samples, dB, dB, . . .

SEE ALSO

The primary source of documentation is the wiki on github:

https://github.com/mossmann/hackrf/wiki

░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░

  █║▌│║█║▌★ KALI ★ PARROT ★ DEBIAN 🔴 PENTESTING ★ HACKING ★ █║▌│║█║▌

              ██╗ ██╗ ██████╗  ██████╗ ██╗  ██╗███████╗██████╗
             ████████╗██╔══██╗██╔═══██╗╚██╗██╔╝██╔════╝██╔══██╗
             ╚██╔═██╔╝██║  ██║██║   ██║ ╚███╔╝ █████╗  ██║  ██║
             ████████╗██║  ██║██║   ██║ ██╔██╗ ██╔══╝  ██║  ██║
             ╚██╔═██╔╝██████╔╝╚██████╔╝██╔╝ ██╗███████╗██████╔╝
              ╚═╝ ╚═╝ ╚═════╝  ╚═════╝ ╚═╝  ╚═╝╚══════╝╚═════╝

               █║▌│║█║▌ WITH COMMANDLINE-KUNGFU POWER █║▌│║█║▌

░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░