Linux cli command mbimcli

➡ A Linux man page (short for manual page) is a form of software documentation found on Linux and Unix-like operating systems. This man-page explains the command mbimcli and provides detailed information about the command mbimcli, system calls, library functions, and other aspects of the system, including usage, options, and examples of _. You can access this man page by typing man followed by the mbimcli.

6 minute read

NAME 🖥️ mbimcli 🖥️

Control MBIM devices

DESCRIPTION

Usage:

mbimcli [OPTION?] - Control MBIM devices

Help Options:

-h, –help
Show help options

–help-all
Show all help options

–help-basic-connect
Show Basic Connect Service options

–help-phonebook
Show Phonebook Service options

–help-dss
Show Device Service Stream options

–help-ms-firmware-id
Show Microsoft Firmware ID Service options

–help-ms-host-shutdown
Show Microsoft Host Shutdown Service options

–help-ms-sar
Show Microsoft SAR Service options

–help-atds
Show AT&T Device Service options

–help-intel-firmware-update
Show Intel Firmware Update Service options

–help-ms-basic-connect-extensions
Show Microsoft Basic Connect Extensions Service options

–help-quectel
Show Quectel Service options

–help-link-management
Show link management specific options

–help-intel-thermal-rf
Show Intel Thermal RF Service options

–help-ms-voice-extensions
Show Microsoft Voice Extensions Service options

–help-ms-uicc-low-level-access
Show Microsoft UICC Low Level Access Service options

–help-intel-mutual-authentication
Show Intel mutual authentication Service options

–help-intel-tools
Show Intel 5G tools options

–help-google
Show Google Service options

Basic Connect options:

–query-device-caps
Query device capabilities

–query-subscriber-ready-status
Query subscriber ready status

–query-radio-state
Query radio state

–set-radio-state=[(on|off)]
Set radio state

–query-device-services
Query device services

–query-pin-state
Query PIN state

–enter-pin=[(PIN type),(current PIN)]
Enter PIN (PIN type is optional, defaults to PIN1, allowed options: (pin1,network-pin,network-subset-pin,service-provider-pin,corporate-pin)

–change-pin=[(current PIN),(new PIN)]
Change PIN

–enable-pin=[(current PIN)]
Enable PIN

–disable-pin=[(PIN type),(current PIN)]
Disable PIN (PIN type is optional, see enter-pin for details)

–enter-puk=[(PUK type),(PUK),(new PIN)]
Enter PUK (PUK type is optional, defaults to PUK1, allowed options: (puk1,network-puk,network-subset-puk,service-provider-puk,corporate-puk)

–query-pin-list
Query PIN list

–query-home-provider
Query home provider

–query-preferred-providers
Query preferred providers

–query-visible-providers
Query visible providers

–query-registration-state
Query registration state

–register-automatic
Launch automatic registration

–query-signal-state
Query signal state

–query-packet-service-state
Query packet service state

–attach-packet-service
Attach to the packet service

–detach-packet-service
Detach from the packet service

–query-connection-state=[SessionID]
Query connection state (SessionID is optional, defaults to 0)

–connect=[“key=value,…”]
Connect (allowed keys: session-id, access-string, ip-type, auth, username, password, compression, context-type)

–query-ip-configuration=[SessionID]
Query IP configuration (SessionID is optional, defaults to 0)

–disconnect=[SessionID]
Disconnect (SessionID is optional, defaults to 0)

–query-packet-statistics
Query packet statistics

–query-ip-packet-filters=[SessionID]
Query IP packet filters (SessionID is optional, defaults to 0)

–set-ip-packet-filters=[“key=value,…”]
Set IP packet filters (allowed keys: session-id, packet-filter, packet-mask, filter-id)

–query-provisioned-contexts
Query provisioned contexts

–set-provisioned-contexts=[“key=value,…”]
Set provisioned contexts (allowed keys: context-id, context-type, auth, compression, username, password, access-string, provider-id)

–set-signal-state=[“key=value,…”]
Set signal state (allowed keys: signal-strength-interval, rssi-threshold, error-rate-threshold)

–set-network-idle-hint=[(enabled|disabled)]
Set network idle hint

–query-network-idle-hint
Query network idle hint

–set-emergency-mode=[(on|off)]
Set emergency mode

–query-emergency-mode
Query emergency mode

–set-service-activation=[Data]
Set service activation

Phonebook options:

–phonebook-query-configuration
Query the phonebook configuration

–phonebook-read=[(Phonebook index)]
Read phonebook entry with given index

–phonebook-read-all
Read all phonebook entries

–phonebook-write=[(Name),(Number)[,(Index)]]
Add new phonebook entry or update an existing one

–phonebook-delete=[(Phonebook index)]
Delete phonebook entry with given index

–phonebook-delete-all
Delete all phonebook entries

Device Service Stream options:

–dss-connect=[(UUID),(Session ID)]
Connect DSS session

–dss-disconnect=[(UUID),(Session ID)]
Disconnect DSS session

Microsoft Firmware ID options:

–ms-query-firmware-id
Query firmware ID

Microsoft Host Shutdown options:

–ms-notify-host-shutdown
Notify that host is shutting down

Microsoft SAR options:

–ms-set-sar-config=[(device|os),(enabled|disabled)[,[{antenna_index,backoff_index}…]]]
Set SAR config

–ms-query-sar-config
Query SAR config

–ms-set-transmission-status=[(enabled|disabled),(timer)]
Set transmission status and hysteresis timer (in seconds)

–ms-query-transmission-status
Query transmission status

AT&T Device Service options:

–atds-query-signal
Query signal info

–atds-query-location
Query cell location

Intel Firmware Update Service options:

–intel-modem-reboot=[(Boot Mode),(Timeout)]
Reboot modem. Boot mode and timeout arguments only required if MBIMEx >= 2.0.

Microsoft Basic Connect Extensions options:

–ms-query-pco=[SessionID]
Query PCO value (SessionID is optional, defaults to 0)

–ms-query-lte-attach-configuration
Query LTE attach configuration

–ms-query-lte-attach-info
Query LTE attach status information

–ms-query-sys-caps
Query system capabilities

–ms-query-device-caps
Query device capabilities

–ms-query-slot-info-status=[SlotIndex]
Query slot information status

–ms-set-device-slot-mappings=[(SlotIndex)[,(SlotIndex)[,…]]]
Set device slot mappings for each executor

–ms-query-device-slot-mappings
Query device slot mappings

–ms-query-location-info-status
Query location info status

–ms-set-provisioned-contexts=[“key=value,…”]
Set provisioned contexts (allowed keys: operation, context-type, ip-type, state, roaming-control, media-type, source, auth, compression, username, password, access-string)

–ms-query-provisioned-contexts
Query provisioned contexts

–ms-query-base-stations-info
Query base stations info

–ms-device-reset
Reset device

–ms-query-version=[(MBIM version),(MBIM extended version)]
Exchange supported version information. Since MBIMEx v2.0.

–ms-query-registration-parameters
Query registration parameters. Since MBIMEx v3.0.

–ms-set-registration-parameters=[“key=value,…”]
Set registration parameters (required keys: mico-mode, drx-cycle, ladn-info, default-pdu-activation-hint, re-register-if-needed). Since MBIMEx v3.0.

–ms-query-modem-configuration
Query modem configuration. Since MBIMEx v3.0.

–ms-query-wake-reason
Query wake reason. Since MBIMEx v3.0.

Quectel options:

–quectel-query-radio-state
Query radio state

–quectel-set-radio-state=[(on)]
Set radio state

Link management options:

–link-list=[IFACE]
List links created from a given interface

–link-add=[iface=IFACE,prefix=PREFIX[,session-id=N]]
Create new network interface link

–link-delete=IFACE
Delete a given network interface link

–link-delete-all=[IFACE]
Delete all network interface links from the given interface

Intel Thermal RF Service options:

–intel-query-rfim
Query RFIM frequency information

–intel-set-rfim=[(on|off)]
Enable or disable RFIM (disabled by default)

Microsoft Voice Extensions Service options:

–ms-query-nitz
Query network identity and time zone

Microsoft UICC Low Level Access Service options:

–ms-query-uicc-application-list
Query UICC application list

–ms-query-uicc-file-status=[“key=value,…”]
Query UICC file status (allowed keys: application-id, file-path)

–ms-query-uicc-read-binary=[“key=value,…”]
Read UICC binary file (allowed keys: application-id, file-path, read-offset, read-size, local-pin and data)

–ms-query-uicc-read-record=[“key=value,…”]
Read UICC record file (allowed keys: application-id, file-path, record-number, local-pin and data)

–ms-set-uicc-open-channel=[“key=value,…”]
Set UICC open channel (allowed keys: application-id, selectp2arg, channel-group)

–ms-set-uicc-close-channel=[“key=value,…”]
Set UICC close channel (allowed keys: channel, channel-group)

–ms-query-uicc-atr
Query UICC atr

–ms-set-uicc-apdu=[“key=value,…”]
Set UICC apdu (allowed keys: channel, secure-message, classbyte-type, command)

–ms-set-uicc-reset=[(Pass Through Action)]
Set UICC reset

–ms-query-uicc-reset
Query UICC reset

–ms-set-uicc-terminal-capability=[“key=value,…”]
Set UICC terminal capability (allowed keys: terminal-capability)

–ms-query-uicc-terminal-capability
Query UICC terminal capability

Intel mutual authentication Service options:

–intel-query-fcc-lock
Query FCC lock information

–intel-set-fcc-lock=[(ResponsePresent),(Response)]
Set FCC lock information

Intel 5G tools options

–intel-set-trace-config=[(TraceCmd)|(TraceValue)]
Set trace configuration

–intel-query-trace-config=[(TraceCmd)]
Query trace configuration

Google options:

–google-set-carrier-lock=[(Data)]
Set Google Carrier Lock

–google-query-carrier-lock
Query Google Carrier Lock

Application Options:

-d, –device=[PATH]
Specify device path

-p, –device-open-proxy
Request to use the ‘mbim-proxy’ proxy

–device-open-ms-mbimex-v2
Request to enable Microsoft MBIMEx v2.0 support

–device-open-ms-mbimex-v3
Request to enable Microsoft MBIMEx v3.0 support

–no-open=[Transaction ID]
Do not explicitly open the MBIM device before running the command

–no-close
Do not close the MBIM device after running the command

–noop
Don’t run any command

-v, –verbose
Run action with verbose logs, including the debug ones

–verbose-full
Run action with verbose logs, including the debug ones and personal info

–silent
Run action with no logs; not even the error/warning ones

–printable=[(Data)]
Get the printable info of the given hex encoded MBIM message

-V, –version
Print version

COPYRIGHT

Copyright © 2013-2023 Aleksander Morgado License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law.