Linux cli command qmicli

➡ A Linux man page (short for manual page) is a form of software documentation found on Linux and Unix-like operating systems. This man-page explains the command qmicli and provides detailed information about the command qmicli, system calls, library functions, and other aspects of the system, including usage, options, and examples of _. You can access this man page by typing man followed by the qmicli.

  10 minute read  

NAME 🖥️ qmicli 🖥️

Control QMI devices

DESCRIPTION

Usage:

qmicli [OPTION?] - Control QMI devices

Help Options:

-h, –help
Show help options

–help-all
Show all help options

–help-dms
Show Device Management Service options

–help-nas
Show Network Access Service options

–help-wds
Show Wireless Data Service options

–help-pbm
Show Phonebook Management options

–help-pdc
Show platform device configurations options

–help-uim
Show User Identity Module options

–help-sar
Show Specific Absorption Rate options

–help-wms
Show Wireless Messaging Service options

–help-wda
Show Wireless Data Administrative options

–help-voice
Show Voice Service options

–help-loc
Show location options

–help-qos
Show Quality of Service options

–help-gas
Show General Application Service options

–help-gms
Show General Modem Service options

–help-dsd
Show Data System Determination options

–help-dpm
Show Data Port Mapper Service options

–help-fox
Show Foxconn Modem Service options

–help-atr
Show AT Relay Service options

–help-imsp
Show IP Multimedia Subsystem Presence Service options

–help-imsa
Show IP Multimedia Subsystem Application Service options

–help-ims
Show IP Multimedia Subsystem Settings Service options

–help-link-management
Show link management specific options

–help-qmiwwan
Show qmi_wwan driver specific options

DMS options:

–dms-get-ids
Get IDs

–dms-get-capabilities
Get capabilities

–dms-get-manufacturer
Get manufacturer

–dms-get-model
Get model

–dms-get-revision
Get revision

–dms-get-msisdn
Get MSISDN

–dms-get-power-state
Get power state

–dms-uim-set-pin-protection=[(PIN|PIN2),(disable|enable),(current PIN)]
Set PIN protection in the UIM

–dms-uim-verify-pin=[(PIN|PIN2),(current PIN)]
Verify PIN

–dms-uim-unblock-pin=[(PIN|PIN2),(PUK),(new PIN)]
Unblock PIN

–dms-uim-change-pin=[(PIN|PIN2),(old PIN),(new PIN)]
Change PIN

–dms-uim-get-pin-status
Get PIN status

–dms-uim-get-iccid
Get ICCID

–dms-uim-get-imsi
Get IMSI

–dms-uim-get-state
Get UIM State

–dms-uim-get-ck-status=[(pn|pu|pp|pc|pf)]
Get CK Status

–dms-uim-set-ck-protection=[(pn|pu|pp|pc|pf),(disable),(key)]
Disable CK protection

–dms-uim-unblock-ck=[(pn|pu|pp|pc|pf),(key)]
Unblock CK

–dms-get-hardware-revision
Get the HW revision

–dms-get-operating-mode
Get the device operating mode

–dms-set-operating-mode=[(Operating mode)]
Set the device operating mode

–dms-get-time
Get the device time

–dms-get-prl-version
Get the PRL version

–dms-get-activation-state
Get the state of the service activation

–dms-activate-automatic=[Activation Code]
Request automatic service activation

–dms-activate-manual=[SPC,SID,MDN,MIN]
Request manual service activation

–dms-get-user-lock-state
Get the state of the user lock

–dms-set-user-lock-state=[(disable|enable),(current lock code)]
Set the state of the user lock

–dms-set-user-lock-code=[(old lock code),(new lock code)]
Change the user lock code

–dms-read-user-data
Read user data

–dms-write-user-data=[(User data)]
Write user data

–dms-read-eri-file
Read ERI file

–dms-restore-factory-defaults=[(Service Programming Code)]
Restore factory defaults

–dms-validate-service-programming-code=[(Service Programming Code)]
Validate the Service Programming Code

–dms-set-firmware-id
Set firmware id

–dms-get-band-capabilities
Get band capabilities

–dms-get-factory-sku
Get factory stock keeping unit

–dms-list-stored-images
List stored images

–dms-select-stored-image=[modem#,pri#] where # is the index
Select stored image

–dms-delete-stored-image=[modem#|pri#] where # is the index
Delete stored image

–dms-get-firmware-preference
Get firmware preference

–dms-set-firmware-preference=[“key=value,…”]
Set firmware preference (required keys: firmware-version, config-version, carrier; optional keys: modem-storage-index, override-download=yes)

–dms-get-boot-image-download-mode
Get boot image download mode

–dms-set-boot-image-download-mode=[normal|boot-and-recovery]
Set boot image download mode

–dms-get-software-version
Get software version

–dms-set-fcc-authentication
Set FCC authentication

–dms-get-supported-messages
Get supported messages

–dms-hp-change-device-mode=[fastboot]
Change device mode (HP specific)

–dms-swi-get-current-firmware
Get Current Firmware (Sierra Wireless specific)

–dms-swi-get-usb-composition
Get current and supported USB compositions (Sierra Wireless specific)

–dms-swi-set-usb-composition=[#]
Set USB composition (Sierra Wireless specific)

–dms-foxconn-change-device-mode=[fastboot-ota|fastboot-online]
Change device mode (Foxconn specific)

–dms-foxconn-get-firmware-version=[firmware-mcfg-apps|firmware-mcfg|apps]
Get firmware version (Foxconn specific)

–dms-foxconn-set-fcc-authentication=[magic]
Set FCC authentication (Foxconn specific)

–dms-foxconn-set-fcc-authentication-v2=[magic-string,magic-number]
Set FCC authentication (Foxconn specific, v2)

–dms-get-mac-address=[wlan|bt]
Get default MAC address

–dms-reset
Reset the service state

–dms-noop
Just allocate or release a DMS client. Use with `–client-no-release-cid’ and/or `–client-cid'

NAS options:

–nas-get-signal-strength
Get signal strength

–nas-get-signal-info
Get signal info

–nas-get-tx-rx-info=[(Radio Interface)]
Get TX/RX info

–nas-get-home-network
Get home network

–nas-get-serving-system
Get serving system

–nas-get-system-info
Get system info

–nas-get-technology-preference
Get technology preference

–nas-get-preferred-networks
Get preferred networks

–nas-set-preferred-networks=[[MCCMNC,access_tech],…]
Set preferred networks list

–nas-get-system-selection-preference
Get system selection preference

–nas-set-system-selection-preference=[cdma-1x|cdma-1xevdo|gsm|umts|lte|td-scdma][,[automatic|manual=MCCMNC]]
Set system selection preference

–nas-network-scan
Scan networks

–nas-get-cell-location-info
Get Cell Location Info

–nas-force-network-search
Force network search

–nas-get-operator-name
Get operator name data

–nas-get-plmn-name=[mccmnc]
Get plmn name data

–nas-get-lte-cphy-ca-info
Get LTE Cphy CA Info

–nas-get-rf-band-info
Get RF Band Info

–nas-get-drx
Get DRX

–nas-get-supported-messages
Get supported messages

–nas-swi-get-status
Get status ((Sierra Wireless specific)

–nas-reset
Reset the service state

–nas-noop
Just allocate or release a NAS client. Use with `–client-no-release-cid’ and/or `–client-cid'

WDS options:

–wds-start-network=[“key=value,…”]
Start network (allowed keys: apn, 3gpp-profile, 3gpp2-profile, auth (PAP|CHAP|BOTH), username, password, autoconnect=yes, ip-type (4|6))

–wds-follow-network
Follow the network status until disconnected. Use with `–wds-start-network'

–wds-stop-network=[Packet data handle] OR [disable-autoconnect]
Stop network

–wds-get-current-settings
Get current settings

–wds-get-packet-service-status
Get packet service status

–wds-get-packet-statistics
Get packet statistics

–wds-get-data-bearer-technology
Get data bearer technology

–wds-get-current-data-bearer-technology
Get current data bearer technology

–wds-go-dormant
Make the active data connection go dormant

–wds-go-active
Make the active data connection go active

–wds-get-dormancy-status
Get the dormancy status of the active data connection

–wds-create-profile=["(3gpp|3gpp2)[,key=value,…]"]
Create new profile using first available profile index (optional keys: name, apn, pdp-type (IP|PPP|IPV6|IPV4V6), auth (NONE|PAP|CHAP|BOTH), username, password, context-num, no-roaming=yes, disabled=yes)

–wds-swi-create-profile-indexed=["(3gpp|3gpp2),#[,key=value,…]"]
Create new profile at specified profile index [Sierra Wireless specific] (optional keys: name, apn, pdp-type (IP|PPP|IPV6|IPV4V6), auth (NONE|PAP|CHAP|BOTH), username, password, context-num, no-roaming=yes, disabled=yes)

–wds-modify-profile=["(3gpp|3gpp2),#,key=value,…"]
Modify existing profile (optional keys: name, apn, pdp-type (IP|PPP|IPV6|IPV4V6), auth (NONE|PAP|CHAP|BOTH), username, password, context-num, no-roaming=yes, disabled=yes)

–wds-delete-profile=[(3gpp|3gpp2),#]
Delete existing profile

–wds-get-profile-list=[3gpp|3gpp2]
Get profile list

–wds-get-default-profile-number=[3gpp|3gpp2]
Get default profile number

–wds-set-default-profile-number=[(3gpp|3gpp2),#]
Set default profile number

–wds-get-default-settings=[3gpp|3gpp2]
Get default settings

–wds-get-autoconnect-settings
Get autoconnect settings

–wds-set-autoconnect-settings=[(enabled|disabled|paused)[,(roaming-allowed|home-only)]]
Set autoconnect settings (roaming settings optional)

–wds-get-supported-messages
Get supported messages

–wds-reset
Reset the service state

–wds-bind-data-port=[a2-mux-rmnet0-7|#]
Bind data port to controller device to be used with `–client-no-release-cid'

–wds-bind-mux-data-port=[“key=value,…”]
Bind qmux data port to controller device (allowed keys: mux-id, ep-type (undefined|hsusb|pcie|embedded|bam-dmux), ep-iface-number) to be used with `–client-no-release-cid'

–wds-set-ip-family=[4|6]
Set IP family

–wds-get-channel-rates
Get channel data rates

–wds-get-lte-attach-parameters
Get LTE attach parameters

–wds-get-max-lte-attach-pdn-num
Get the maximum number of LTE attach PDN

–wds-get-lte-attach-pdn-list
Get the list of LTE attach PDN

–wds-set-lte-attach-pdn-list=[#,#,…]
Set the list of LTE attach PDN

–wds-noop
Just allocate or release a WDS client. Use with `–client-no-release-cid’ and/or `–client-cid'

PBM options:

–pbm-get-all-capabilities
Get all phonebook capabilities

–pbm-noop
Just allocate or release a PBM client. Use with `–client-no-release-cid’ and/or `–client-cid'

PDC options:

–pdc-list-configs=[(platform|software)]
List all configs

–pdc-delete-config=[(platform|software),ConfigId]
Delete config

–pdc-activate-config=[(platform|software),ConfigId]
Activate config

–pdc-deactivate-config=[(platform|software),ConfigId]
Deactivate config

–pdc-load-config=[Path to config]
Load config to device

–pdc-monitor-refresh
Watch for refresh indications

–pdc-noop
Just allocate or release a PDC client. Use with `–client-no-release-cid’ and/or `–client-cid'

UIM options:

–uim-set-pin-protection=[(PIN1|PIN2|UPIN),(disable|enable),(current PIN)]
Set PIN protection

–uim-verify-pin=[(PIN1|PIN2|UPIN),(current PIN)]
Verify PIN

–uim-unblock-pin=[(PIN1|PIN2|UPIN),(PUK),(new PIN)]
Unblock PIN

–uim-change-pin=[(PIN1|PIN2|UPIN),(old PIN),(new PIN)]
Change PIN

–uim-read-transparent=[0xNNNN,0xNNNN,…]
Read a transparent file given the file path

–uim-get-file-attributes=[0xNNNN,0xNNNN,…]
Get the attributes of a given file

–uim-read-record=[“key=value,…”]
Read a record from given file (allowed keys: record-number, record-length, file ([0xNNNN-0xNNNN,…])

–uim-get-card-status
Get card status

–uim-get-supported-messages
Get supported messages

–uim-sim-power-on=[(slot number)]
Power on SIM card

–uim-sim-power-off=[(slot number)]
Power off SIM card

–uim-change-provisioning-session=[“key=value,…”]
Change provisioning session (allowed keys: session-type, activate, slot, aid)

–uim-get-slot-status
Get slot status

–uim-switch-slot=[(slot number)]
Switch active physical slot

–uim-monitor-slot-status
Watch for slot status indications

–uim-reset
Reset the service state

–uim-monitor-refresh-file=[0xNNNN,0xNNNN,…]
Watch for REFRESH events for given file paths

–uim-monitor-refresh-all
Watch for REFRESH events for any file

–uim-get-configuration
Get personalization status of the modem

–uim-depersonalization=[(feature),(operation),(control key)[,(slot number)]]
Deactivates or unblocks personalization feature

–uim-remote-unlock=[XX:XX:…]
Updates the SimLock configuration data

–uim-noop
Just allocate or release a UIM client. Use with `–client-no-release-cid’ and/or `–client-cid'

SAR options:

–sar-rf-get-state
Get RF state

–sar-rf-set-state=[(state number)]
Set RF state.

–sar-noop
Just allocate or release a SAR client. Use with `–client-no-release-cid’ and/or `–client-cid'

WMS options:

–wms-get-supported-messages
Get supported messages

–wms-get-routes
Get SMS route information

–wms-set-routes=[“key=value,…”]
Set SMS route information (keys: type, class, storage, receipt-action)

–wms-reset
Reset the service state

–wms-noop
Just allocate or release a WMS client. Use with `–client-no-release-cid’ and/or `–client-cid'

WDA options:

–wda-set-data-format=[“key=value,…”]
Set data format (allowed keys: link-layer-protocol (802-3|raw-ip), ul-protocol (disabled|tlp|qc-ncm|mbim|rndis|qmap|qmapv5), dl-protocol (disabled|tlp|qc-ncm|mbim|rndis|qmap|qmapv5), dl-datagram-max-size, dl-max-datagrams, ep-type (undefined|hsusb|pcie|embedded), ep-iface-number, ul-datagram-max-size, ul-max-datagrams)

–wda-get-data-format=[“key=value,…”]
Get data format (allowed keys: ep-type (undefined|hsusb|pcie|embedded), ep-iface-number); also allows empty key list

–wda-get-supported-messages
Get supported messages

–wda-noop
Just allocate or release a WDA client. Use with `–client-no-release-cid’ and/or `–client-cid'

VOICE options:

–voice-get-config
Get Voice service configuration

–voice-get-supported-messages
Get supported messages

–voice-noop
Just allocate or release a VOICE client. Use with `–client-no-release-cid’ and/or `–client-cid'

LOC options:

–loc-session-id=[ID]
Session ID for the LOC session

–loc-start
Start location gathering

–loc-stop
Stop location gathering

–loc-get-position-report
Get position reported by the location module

–loc-get-gnss-sv-info
Show GNSS space vehicle info

–loc-timeout=[SECS]
Maximum time to wait for information in `–loc-get-position-report’ and `–loc-get-gnss-sv-info’ (default 30s)

–loc-follow-position-report
Follow all position updates reported by the location module indefinitely

–loc-follow-gnss-sv-info
Follow all GNSS space vehicle info updates reported by the location module indefinitely

–loc-follow-nmea
Follow all NMEA trace updates reported by the location module indefinitely

–loc-delete-assistance-data
Delete positioning assistance data

–loc-get-nmea-types
Get list of enabled NMEA traces

–loc-set-nmea-types=[type1|type2|type3…]
Set list of enabled NMEA traces

–loc-get-operation-mode
Get operation mode

–loc-set-operation-mode=[default|msb|msa|standalone|cellid|wwan]
Set operation mode

–loc-get-engine-lock
Get engine lock status

–loc-set-engine-lock=[none|mi|mt|all]
Set engine lock status

–loc-noop
Just allocate or release a LOC client. Use with `–client-no-release-cid’ and/or `–client-cid'

QoS options:

–qos-get-flow-status=[QoS ID]
Get QoS flow status

–qos-get-network-status
Gets the network status

–qos-swi-read-data-stats=[APN ID]
Read data stats (Sierra Wireless specific)

–qos-reset
Reset the service state

–qos-noop
Just allocate or release a QOS client. Use with `–client-no-release-cid’ and/or `–client-cid'

GAS options:

–gas-dms-set-usb-composition=[pid]
Sets the USB composition

–gas-dms-get-usb-composition
Gets the current USB composition

–gas-dms-get-firmware-list
Gets the list of stored firmware

–gas-dms-get-active-firmware
Gets the currently active firmware

–gas-dms-set-active-firmware=[index]
Sets the active firmware index

–gas-noop
Just allocate or release a GAS client. Use with `–client-no-release-cid’ and/or `–client-cid'

GMS options:

–gms-test-get-value
Gets test value

–gms-test-set-value=[mandatory-value][,[optional-value]]
Sets test value

–gms-noop
Just allocate or release a GMS client. Use with `–client-no-release-cid’ and/or `–client-cid'

DSD options:

–dsd-get-apn-info=[(type)]
Gets the settings associated to a given APN type

–dsd-set-apn-type=[(name), (type1|type2|type3…)]
Sets the types associated to a given APN name

–dsd-get-system-status
Gets system status

–dsd-noop
Just allocate or release a DSD client. Use with `–client-no-release-cid’ and/or `–client-cid'

DPM options:

–dpm-open-port=[“key=value,…”]
Open port (allowed-keys: ctrl-ep-type, ctrl-ep-iface-number, ctrl-port-name, hw-data-ep-type, hw-data-ep-iface-number, hw-data-rx-id, hw-data-tx-id, sw-data-ep-type, sw-data-ep-iface-number, sw-data-port-name)

–dpm-close-port
Close port

–dpm-noop
Just allocate or release a DPM client. Use with `–client-no-release-cid’ and/or `–client-cid'

FOX options:

–fox-get-firmware-version=[firmware-mcfg-apps|firmware-mcfg|apps]
Get firmware version

–fox-noop
Just allocate or release a FOX client. Use with `–client-no-release-cid’ and/or `–client-cid'

ATR options:

–atr-send=[AT command]
Send an AT command and wait for the reply

–atr-send-only=[AT command]
Send an AT command without waiting for the reply

–atr-monitor
Watch for unsolicited indications

–atr-noop
Just allocate or release an ATR client. Use with `–client-no-release-cid’ and/or `–client-cid'

IMSP options:

–imsp-get-enabler-state
Get IMSP enabler state

–imsp-noop
Just allocate or release a IMSP client. Use with `–client-no-release-cid’ and/or `–client-cid'

IMSA options:

–imsa-get-ims-registration-status
Get IMS registration status

–imsa-get-ims-services-status
Get IMS services status

–imsa-noop
Just allocate or release a IMSA client. Use with `–client-no-release-cid’ and/or `–client-cid'

IMS options:

–ims-get-ims-services-enabled-setting
Get IMS Services Enabled Setting

–ims-noop
Just allocate or release a IMS client. Use with `–client-no-release-cid’ and/or `–client-cid'

–link-list=[IFACE]
List links created from a given interface

–link-add=[iface=IFACE,prefix=PREFIX[,mux-id=N][,flags=FLAGS]]
Create new network interface link

–link-delete=[link-iface=IFACE][,[mux-id=N]]
Delete a given network interface link

–link-delete-all=[IFACE]
Delete all network interface links from the given interface

qmi_wwan specific options:

-w, –get-wwan-iface
Get the associated WWAN iface name

-e, –get-expected-data-format
Get the expected data format in the WWAN iface

-E, –set-expected-data-format=[802-3|raw-ip|qmap-pass-through]
Set the expected data format in the WWAN iface

Application Options:

-d, –device=[PATH|URI]
Specify device path or QRTR URI (e.g. qrtr://0)

–get-service-version-info
Get service version info

–device-set-instance-id=[Instance ID]
Set instance ID

–device-open-version-info
Run version info check when opening device

–device-open-sync
Run sync operation when opening device

-p, –device-open-proxy
Request to use the ‘qmi-proxy’ proxy

–device-open-qmi
Open a cdc-wdm device explicitly in QMI mode

–device-open-mbim
Open a cdc-wdm device explicitly in MBIM mode

–device-open-auto
Open a cdc-wdm device in either QMI or MBIM mode (default)

–device-open-net=[net-802-3|net-raw-ip|net-qos-header|net-no-qos-header]
Open device with specific link protocol and QoS flags

–client-cid=[CID]
Use the given CID, don’t allocate a new one

–client-no-release-cid
Do not release the CID when exiting

-v, –verbose
Run action with verbose logs, including the debug ones

–verbose-full
Run action with verbose logs, including the debug ones and personal info

–silent
Run action with no logs; not even the error/warning ones

-V, –version
Print version

COPYRIGHT

Copyright © 2012-2023 Aleksander Morgado License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law.

SEE ALSO

The full documentation for qmicli is maintained as a Texinfo manual. If the info and qmicli programs are properly installed at your site, the command

info qmicli

should give you access to the complete manual.

░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░

  █║▌│║█║▌★ KALI ★ PARROT ★ DEBIAN 🔴 PENTESTING ★ HACKING ★ █║▌│║█║▌

              ██╗ ██╗ ██████╗  ██████╗ ██╗  ██╗███████╗██████╗
             ████████╗██╔══██╗██╔═══██╗╚██╗██╔╝██╔════╝██╔══██╗
             ╚██╔═██╔╝██║  ██║██║   ██║ ╚███╔╝ █████╗  ██║  ██║
             ████████╗██║  ██║██║   ██║ ██╔██╗ ██╔══╝  ██║  ██║
             ╚██╔═██╔╝██████╔╝╚██████╔╝██╔╝ ██╗███████╗██████╔╝
              ╚═╝ ╚═╝ ╚═════╝  ╚═════╝ ╚═╝  ╚═╝╚══════╝╚═════╝

               █║▌│║█║▌ WITH COMMANDLINE-KUNGFU POWER █║▌│║█║▌

░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░